Have any questions?
+44 1234 567 890
Usage
3. "WILOTEKT-Grundierung" primer ETA-03/0049/ CE
Using a roller or spray gun, apply primer to entire dry concrete surface (air temperature should not be below 5 degrees C) at a coverage ratio of approx. 0,3 kg/ m2. The diagram below shows the corner upturn of the "WILOTEKT-PLUS" composite waterproofing at the concrete edge:
Fig. 1
4. "WILOTEKT-Bewehrungseinlage" internal reinforcement layer ETA-03/0049/ CE
Loosely lay the internal reinforcement layer on the dry "WILOTEKT- Grundierung" primer with overlapping joints of 10 cm.
The diagram below shows the corner upturn of the "WILOTEKT-PLUS" composite waterproofing at the concrete edge:
Fig. 2
